E-PROPS HI-TECH CARBON PROPELLERS



DONNEES

 

Français / English

 

 

 

MINI-SPINNERS

 

 

Hélices E-Props manufacture propellers' spinners in carbon, very strong, the lightest on the market. They are black (carbon finishing), well-balanced and ready to be mounted.

 

The E-Props team has developed a MINI-SPINNER which adapted itself to the hubs of the ALMACIA, DURANDAL et EXCALIBUR propellers :

- diameter : 130 mm

- lenght : 85 mm

- weight : 40 gr (70 gr with the central screw)

 

e-props mini spinner mini cone

E-PROPS mini-spinner SP-130 : the lightest spinner on the market

 

 

ASSEMBLY :

1 – On the central screw of the hub : put the hexagonal long screw with its Nord-Lock washer (replace the normal screw).
2 - Tighten this long screw at the same torque as the screws : 24 N.m or 28 N.m (please verify the torque on the Instruction Manual of your propeller)
3 – Put the Mini-Spinner on the hub
4 – Put the Nylon screw with its seal in the long screw through the Mini-Spinner
5 – Tighten the Nylon screw at 1,5 to 2 N.m with a 6 mm Allen key

 

 

=> INSTRUCTIONS in PDF

 

 

excalibur-6 with mini spinner

cône SP-13 e-props tractif

pusher on gyro / tractor on aircraft

 

 

 

montage mini-cone e-props assembly mini spinner

assembly of a mini-spinner on an E-Props propeller

 

 

 

To order a mini-spinner on the E-SHOP : E-PROPS MINI-SPINNER

 

 

 

eprops mini-cone

 

 

 

 

 

E-PROPS HI-TECH CARBON PROPELLERS